Pneumatic Conveying Systems and Equipment

Sound Enclosure for Material Handling Fan

Cyclone with Discharge Diverter above Compactor

Diverters after Material Handling Fans

Pneumatic Conveying System

Silencer

BloApCo Air System Components Ensure the Integrity of Your Entire Scrap Handling Process

A weak part compromises the strength of the entire system. BloApCo ensures the integrity of your entire scrap handling process.

An efficient system is made up of parts that are all well-designed and ruggedly constructed, with every part working at its top capacity. Let BloApCo’s experienced engineers help bring your scrap handling system to peak performance with our excellent equipment, strategic installation, and operator training. Whether you require an upgrade, an expansion, or a totally new system, we will adapt BloApCo equipment such as Shredders, Trim Cutters, and Material Handling Fans, as well as Mechanical and Pneumatic Conveying components to provide an integrated scrap removal system fine-tuned to your unique needs. Talk to us about what you need; if you are not sure we will discuss your process and offer expert advice on your best options.

Thousands of successful and profitable installations worldwide prove the point.

Our Smart Engineering & Superior Equipment Construction are only the beginning. Let us Customize a Total Scrap Handling System for Your Special Requirements, Install it, and Train your Staff to Run it.

Diverters

Air System Diverter Valve and Seal Drum Conveyor

BloApCo Diverter Valves provide a fast positive change in scrap flow. They are remotely controlled and permit users to separate scrap by color, material, grades, or condition, i.e., clean and contaminated. They are true high-pressure diverters and are designed to be “sealed” into the system. Two models are available for both the suction side or pressure side of a pneumatic system.

Separators

Gravity separates scrap or waste from a spinning cyclone of air, and diverts it to a baler chute or other receptacle. At the same time the air itself either escapes to the outdoors or returns via an air filter inside the plant. The separator can be located on the rooftop or inside the plant depending upon your needs.

Related Literature:
Bulletin 251: Converting Waste Capabilities

Seal Drum Conveyors

BloApCo seal-drum conveyors offer significant energy and dollar savings over conventional printer, slotter, flexo or die cutter discharge belt or fan-powered conveyors, by using air from outside& usually from a stack through the roof. The 12″ belt covered floating seal-drum, mounted just ahead of the enclosed discharge end of the conveyor, seals off entrance of plant air. When scrap is introduced, the seal-drum simply raises up on its pivot arms and allows material to enter and be swept away by the pneumatic system. The advantages are significant, as the drum achieves a 95% effective seal against induction of plant air.

Two Cyclone Systems with Dust Filters

Venturi Mounted on Blower

Backdraft Damper Retrofit

Conveyor Pick Up

Cyclone with Dust Filter and Balance Fan